TR202C

Model TR201C Series Terminating Machine

Both-ends crimping machine TR202C

Maximum processing capacity : 4,500 pieces per hour

The processing capacity for longer cables has been increased by compared with the conventional model
Processing medium size wire of AWG16 to 28 can be handled
Appearance with cleanness
Swing type color touch panel
Terminal reel neatly housed inside the main body
The quiet press with consideration to the working environment
Eco cable compatible

Standard Specification

Max. processing capacity^*1		4,500pcs/h (cutting length = 30mm, stripping length = 5mm, Both-ends crimping)
Max. cutting length		9,999mm
Min. cutting length^*2		30mm
Stripping length	Stripping	1 - 15mm(0.1mm intervals)
Stripping length	Semi-stripping	1 - 25mm(0.1mm intervals)
Wire size^*3	Size	AWG16 - 28(stranded wire)
Wire size^*3	Wire O.D.	φ0.8 - 3.2mm
Press capacity		19.6kN (2.0t)
Crimping terminals^*4		Continuous open barrel, Side/End feeding
Driving motor		8 Axis AC servo-control
Power supply		3-phase AC 200V±20V 15A(50/60Hz)
Compressed air source^*5		0.4 - 0.5MPa (4-5kgf/cm²) 60NL/Min.or over
Weight		Main body Approx. 400kg
Operation temperature		15 - 25°C

*1Compressed air with moisture, oil, or dust may cause malfunction of the equipment.
*2 The minimum cut length may change due to the applicator to use, type of the wire, or processing conditions. By using the optional special clamp, shorter ones may be processed. Contact us for details.
*3 The processing capacity may decline due to specification or conditions of processing goods.
*4 As for end feed terminal, the optional "reel hanger for end feed" is necessary.
*5 Compressed air with moisture, oil, or dust may cause malfunction of the equipment.

*It is not possible to equip both upper feeding type and lower feeding type at a time and use them concurrently.
* "End feeding terminal reel hanger","Paper coiler" are optional items.