About TRD301C Series

Model TRD301C Series Terminating Machine

Product Inquiries

Wire size application table
Outside Dimensions
Standard Specification

Wire size application table

* An option is available to replace standard clamp with a heavy gauge style clamp. The crimping press capability is of the standard specification (TRD301 series,24.5 kN)
*The mm²/AWG conversion for wire size is for reference only.

Outside Dimensions

* It is not possible to equip both upper feeding type and lower feeding type at a time use them concurrently. "End feeding terminal reel hanger," "Insulating paper take-up device" and "PC stand" are optional items.

Standard Specification

Model		TRD301C	TRD301C WPA	TRD301C WPSA	TRD301C WPSB	TRD301C MS
Max. processing capacity^*1	Both-ends crimping	4,500 pcs/h	4,100 pcs/h	4,100 pcs/h	4,500 pcs/h	1,450 pcs/h (Intermediate strip at one location)
	Both-ends crimping and seal insertion	ー	2,800 pcs/h	ー	ー	ー
	Both-ends crimping and F side seal insertion	ー	3,000 pcs/h	3,000 pcs/h	2,600 pcs/h	ー
Wire size^*2	Size	0.2 - 2.0mm²				AVSS 0.3 - 2.0mm² CAVUS 0.3 - 1.25mm²
Wire size^*2	Wire O.D.	φ 1.0 - 3.0mm				AVSS 0.3 - 2.0mm² CAVUS 0.3 - 1.25mm²
Stripping length	Stripping	1 - 17 mm(0.1mm intervals)				Intermediate stripping length 10 - 20mm Input is 5 - 22mm (0.1 mm Unit)
Stripping length	Semi-stripping	1 - 25 mm(0.1mm intervals)
Max. cutting length		9,999mm
Min. cutting length^*3		80mm	100mm(at seal insertion)			95mm (at intermediate strip)
Press capacity		24.5kN(2.5 t)
Crimping terminals		Continuous open barrel, Side/End feeding
Seals^*4		ー	Max. Outer diameter: 8mm, Max. Length: 12mm, Round shape rubber seals			ー
		ー				ー
Driving motor		10 Axis AC servo-control	12 Axis AC servo-control		10 Axis AC servo-control
Primary power source^*6		3-phase AC200±20V 15A 50/60Hz
Compressed air source		0.5 Mpa(5kgf/cm²) or over 0.1 m³/min (100L/min) Normal or over
Operation language^*7		Two-languages comprised of English and one another language (Japanese, Chinese, Thai, Spanish or Indonesian)
Operation temperature		15 - 25°C
Dimensions^*8		Height 1,530 mm × Width 1,080 mm × Depth 880 mm (main body only, excluding protrusions)
Weight		Main body Approx. 670kg Pre-feeder Approx. 40kg	Main body Approx. 690kg, Pre-feeder Approx. 40kg			Main body Approx. 670kg Pre-feeder Approx. 40kg

*1Capacity might change depending on the processing conditions and processing data.
*2Processing may be difficult depending on wire type.
*3Length may become longer depending on setting of the applicator and processing data.
*4Please consult with us if you require a shape larger than the indicated size.
*5A voltage changing transformer is available for use in other countries than Japan upon request.
*6For languages other than the indicated,please consult with us.
*7The indicated values are for the main body only. For the installation dimensions,pleases see the overall size drawing.