TRD801 Series Option
Model TRD801 Series Terminating Machine
Option list
| Model | TRD801/TRD801WPSA |
|---|---|
| Attachment | ○ |
| Paper coiler | ○ |
| Terminal overload sensor | ○ |
| Lower terminal reel hanger for side feed*1 | ○ |
| Terminal reel hanger for end feed | ○ |
| Dial type wire straightener | ○ |
| No cut carrier guide | ○ |
| Carrier cutter | ○ |
| Signal tower | ○ |
| Special R clamp | ○ |
| Special length measurement roller | ○ |
| Special prefeeder roller | ○ |
| Easy detachable base | ○ |
| Terminal crimping monitor | ○ |
| Wire joint sensor | ○ |
| Wire chopper | ○ |
| Guide nozzle | ○ |
| Spring nozzle | ○ |
| Slope type wire tray | ○ |
| Long wire stacker (1.5m, 2.5m, 3.5m) | ○ |
| Simple bobbin feeder | ○ |
| Prefeeder auxiliary guide | ○ |
| Terminal leader | ○ |
| Conveyor type wire portioning unit (0.5m) | Under development |
- *Upper terminal reel hanger for side feed is standard equipment.
Accumulator
TRA2500B : Bobbin type Accumulator
TRA2500WS : Wire spool type Accumulator
- Wire supplying capability: 2,500 mm/s
- With this bobbin feeder, TRD801 can process a wire up to 2500mm-long.
- *(when using a P30-size bobbin)
- Easy set-up of wire
- Wire setting on pulleys
Large flanges and speed control to prevent the wire dropping off
| Model | TRA2500WSB | TRA2500WS | TRA2500B |
| Wire supply | Bobbin, Wire spool | Wire spool | Bobbin |
| Wire size*1 | 0.08 - 0.5sq | ||
| Applicable bobbin | P type: P2 - P30 *2 | ||
| Max. supply capability | 2,500 mm/s | ||
| Power supply | 1-phase(50/60Hz) AC200-240V or AC100-115V | ||
| Compressed air source | 0.5±0.1Mpa | ||
| Dimensions | 1200mm(W) × 520mm(L) × 890mm(H)*3 | ||
| Weight | 75kg *3 | ||
- *1 The applicable wire range is for reference. Feeding may be difficult depending on the wire type.
- *2 For details of the bobbin requirements, please contact us.
- *3 Dimensions and Weight in case of TRA2500WSB
Contact Information
Click here for product inquiries.
Search for other products and services
ShinMaywa INSIGHT
March 09, 2022
