PWM Driver

Downsizing: 1/3 the weight and 2/5 the volume compared to conventional models (small capacity driver)

Expansion of output current rank: Compatible with output rated current up to 75A.

Setting parameters interactively

[SVC] series

BUILT-IN DD Motor

Can be used by switching control modes: With one driver, you can switch between three modes: position control, speed control, and current control using external commands.

A wide range of lineup allows for a wide range of applications.: Available from 50W to 20kW.

Motor and encoder can be combined freely: In order to freely combine the motor and encoder, it has a commutation adjustment function that corrects the absolute electrical position of each.

Compatible with CC-Link: Network connection is possible with equipment manufactured by other companies that supports CC-Link. Noise resistance performance is improved because wiring can be simplified.

Item		Contents
Driver Type		SVC□□□A1-□□□				SVC□□□A2-□□□
Driver Capacity		051	101	201	401	101	201	401	801	152	222	402	752	113	153	203
Mains Voltage		A1(AC100V)				A2(AC200V)								A2(AC200V)
Control Power Supply Voltage		AC100V				AC200V								DC24V
External Power Supply for Interface		DC12~24V
Output Capacity [W]		50	100	200	400	100	200	400	800	1.5k	2.2k	4.0k	7.5k	11k	15k	20k
Continuous Output Current (peak value) [A]		1.5	2.8	4.8	9.6	1.5	2.8	4.8	9.6	14	22.6	38.1	59.1	67.4	88.5	123.4
Instantaneous Output Current (peak value) [A]		4.6	8.4	13.9	24	4.6	8.4	13.9	24	42.4	67.8	110.2	118.2	134.8	177.0	246.8
Number of Control Axes		Single axis
Control method		Speed/torque/position control
Drive System		3 phase sine wave PWM
Carrier Frequency [kHz]		10・16・20・24										10
Drive Frequency		100Hz～1kHz
Encoder Receiving Frequency		up to 4MHz
Command Clock Reception Frequency		Maximum 1MHz (maximum 4MHz option available)
Control method		Regenerative braking: external regenerative resistor
Mass (kg)		1.0	1.0	1.4	2.4	1.0	1.0	1.4	2.4	4.0	4.0	6.0	7.4	7.7	10.0	18.5
Ambient Conditions	Temperature	Operating temperature: 0 to 55°C (device surroundings)/Storage temperature: -20 to 60°C
	Humidity	85% or less, non-condensing
	Installation location	Do not install in a harmful atmosphere such as corrosive gas, grinding oil, metal powder, oil, etc.
Cooling Method		Natural air cooling (801 or less), forced air cooling (152 or more)
Earthquake Resistance		0.5G(10~50Hz)
Shockproof		5G
Noise Resistance		Line noise: 2000V (50ns, 1μs), 1 minute ・Radiation noise: 1000V (50ns, 10cm), 1 minute ・Electrostatic noise: 10kV (between earth enclosures)

No.	Option Number	Name	Remarks
1	SVC-OPT01	Computer communication cable	RS232C 25 pin
2	SVC-OPT02	VC editing software Japanese CD-ROM	For SVCⅠ
3	SVC-OPT03A	Hall IC conversion board D side	No 5V power supply for encoder, with 0.3m cable
4	SVC-OPT03B	Hall IC conversion board D side	5V power supply for encoder included, 0.3m cable included
5	SVC-OPT04	Hall IC conversion board M side	Connect to motor side output connector
6	SVC-OPT05	SDI device	For parameter input and status display
7	SVC-OPT06	High-speed pulse train command receiving unit	Connect to motor output connector
8	SVC-OPT07A~F	Regenerative resistor	Separately selected by capacity
9	SVC-OPT08A	Built-in dynamic brake	For 800W or less
10	SVC-OPT09A~I	Separate dynamic brake	For drivers over 1.5kW Select by capacity
11	SVC-OPT10	SVC input/output signal converter	I/O conversion for S30T-2
12	SVC-OPT11	Encoder relay board
13	SVC-OPT12	SVC input/output signal converter mounting plate	For OPT10 installation
14	SVC-OPT13	VCⅡ editing software Japanese CD-ROM	For SVCⅡ