Product Information

Semi-automatic machines & Peripheral devices

Desktop Digital Crimper (TRP256DM Series)

The crimping part is separate from the automatic terminating machine "TRD301" for the auto industry. With numerical control, fine adjustments can be made by 1/100 mm in the caulking height and by 1/100 second in the processing speed.

Desktop Digital Crimper
Model TRP256DM TRP256DM-4T
Press capability 24.5kN(2.5ton) 39.2kN(4.0ton)
Crimper stroke 30/40mm (changeable)
Terminal feeding Side, End feed
Crimp height setting 0.01mm unit
Data memory 100 data
Displayed language Japanese, English, Chinese, Spanish
Option Crimp force monitor, Signal Tower, etc.
Power supply 3Phase AC200V 50/60Hz
Dimensions 437mm(W) × 497.5mm(L) × 591mm(H)
Weight 140 kg

Semi Automatic Strip Crimper With Seal insertion(WSC Series)

This machine can automate the seal insertion, strip and crimping processes for multi-core cables and single wires.

  1. Automatic 3 seals changeover technology from our TRD series is integrated for stable seal insertion and simple seal change or easy transfer to another machine.
  2. Minimum Sheath removal length with multi-core cable is 50mm for WSC-12 and 35mm for WSC-11W.
  3. Improved crimping accuracy for bended wires by cutting the tip of the wire (tip cutting is standard function).
WSC-12

WSC-12

WSC-11W

WSC-11W

Model WSC-12 WSC-11W
Processing description Single wire processing 2 wire processing (single wire processing is not available)
Seal insertion / Strip / Crimping Seal insertion / Strip / Crimping
Wire size 0.13~1.25sq
Wire length over 80mm
Sheath removal length over 50mm
Select one from 0.3~0.85sq
Sheath removal length over 50mm
Max. Processing capacity 1.7sec/pc. With Seal insertion 3.6sec/pc. With Seal insertion
1.3sec/pc. Without Seal insertion 1.8sec/pc. Without Seal insertion
Press capability 24.5kN (2.5ton)
Terminal feeding Side, End feed (End reel hangers are optional)
Crimp height setting 0.01mm unit
Strip length 2.00-7.00mm (0.01mm unit)
Tip cut 1.00mm-2.00mm (0.01mm unit)
Data memory 999 data
Displayed language Japanese, Chinese, English, Spanish Japanese, Chinese, English, Spanish, Indonesian
Option Crimp Force Monitor, Interlayer paper winder, Attachment, Foot Switch, etc.
Power supply 3Phase AC200V±10% 50/60Hz
Compressed air source 0.5MPa and above
Dimensions 650mm(W) × 700m(L) × 1750mm(H) 650mm(W) × 800m(L) × 1750mm(H)
Weight Approx. 400kg

Accumulator (TRA Series)

High speed and stable wire feeding bring out the maximum performance of the automatic wire processor.
By feeding wires stably, "wire tangling", "jamming at the length measuring section" and other "tendency of wire" can be improved.

TRA2500B

TRA2500B

TRA4000

TRA4000

Model TRA2500WSB/WS/B TRA4000
Wire supply Bobbin, Wire spool Wire spool
Applicable wire※1 0.08~0.5sq 0.13~2sq
Applicable bobbin P type : P2 to P30※2
Max. Supply capability 2,500 mm/s 4,000 mm/s
Power supply 100~115 VAC or 200~240 VAC, Single-phase (50/60 Hz)
Compressed air source 0.5±0.1Mpa
Dimensions 1200mm(W) × 520mm(L) × 890mm(H)※3 1200mm(W) × 500mm(L) × 870mm(H)
Weight 75kg※3 70kg
  • The applicable wire range is for reference. Feeding may be difficult depending on the wire type.
  • For details of the bobbin requirements, please contact us.
  • Dimensions and Weight in case of TRA2500WSB

Remote Monitoring System

The system can provide a variety of support using data from automatic wire processor.
Information from each plant or production line can be collected in single PC.

Monitoring System

Monitoring of the Produced amount, Operating time, Downtime, Failure time, Error count, Defective pieces, etc.
Report of Operation rate or Achievement rate can be created.

Analyzing System (RMA-01)

The system can support investigation of defects in process by recording the details of machine stoppages and defects.
Defect report is displayed based on materials or machine parameter.

Remote Monitoring System