Developed automatic coaxial cable processing machine compatible with mini-FAKRA
August 1, 2025
ShinMaywa Industries, Ltd. (Head Office: Takarazuka City, Hyogo Prefecture; President and CEO: Isogawa Tatsuyuki) has developed a new automatic wire processors, the mini-FAKRA compatible coaxial cable processing machine "CMM10," and will begin selling it from August 1, 2025.
The "CMM10" is a processing machine that is unique in that it can fully automatically perform processes such as "stripping," "braiding," "crimping the inner and outer conductor terminals," and even "quality inspection" on the ends of coaxial cable wires used in "high-speed communication harnesses," etc. In the case of standard specification, single-end processing, this series of operations can be completed in just 4.5 seconds.
Background of development
In recent years, the automotive market has seen an acceleration in technological development in response to CASE (connected, autonomous driving, sharing, and electrification (EV)). In the fields of autonomous driving and connected cars, the number of in-vehicle cameras required for preventive safety functions has increased, infotainment displays that combine information provision and entertainment experiences have been installed, and navigation systems have evolved, requiring harnesses that transmit video and image data at higher speeds and with larger capacities. Processing "high-speed communication harnesses" that meet these needs, which consist of coaxial cables * and mini-FAKRA connectors, etc., is highly challenging, making automation and mechanization difficult, and until now it has been necessary to use dedicated processing machines for each process.
Demand for high-speed communication harnesses is expected to continue to grow, and manufacturers have expressed high expectations for a new processing machine that combines high processing quality with speedy processing capabilities to help improve productivity.
- * A coaxial cable is a cable used for high-speed communications, etc. It consists of multiple layers: a core wire that transmits electrical signals is wrapped in a resin insulator, a metal mesh shield (outer conductor) on the outside to prevent signal leakage and external noise, and a resin cover for overall protection.
We will continue to contribute to improving our customers' productivity through the development of new technologies and the provision of comprehensive after-sales service.
FAKRA (Fachkreis Automobile) is a coaxial connector that has been standardized in the automotive industry and is widely used in in-vehicle communication systems, antenna connections, and autonomous driving technology. mini-FAKRA is an even smaller coaxial connector that supports high frequencies.
1. Features of the mini-FAKRA compatible coaxial cable processing machine "CMM10"
- 1Automatic processing of mini-FAKRA compatible coaxial cables, which require high processing precision, is possible.
- 2 Customization is possible to match each company's FAKRA main products.
- 3 Our unique crimping technology ensures high-quality crimping of mini-FAKRA terminals onto coaxial cables.
- CFM (Crimp Force Monitor/pressure monitoring system) is standard equipment, ensuring thorough management of crimping quality.
- A total of four cameras are installed to carry out quality inspections at each process.
- Crimping machine parts can be replaced, and 30/40mm stroke switching is also possible.
- 4 We can flexibly respond to various needs, such as processing both ends or one end.
- 5Our unique transport system enables high-precision positioning and processing.
- 6The efficient layout of units reduces the equipment installation area.
2. Order start date
August 1, 2025
3. Scheduled start date of supply
January 2026
4. Price
Approximately 100 million yen (standard specification/excluding tax)
5. Main sales destinations
Wire harness manufacturers
6. Sales Target
50 units per year (2030)
7. Specifications (standard specifications)
| Model | Coaxial cable processing machine "CMM10" |
|---|---|
| Processing type | Both ends processed / One end processed |
| Machining Cycle Time | 9 seconds (both ends) / 4.5 seconds (one end) |
| Minimum cutting length | 380mm or more (both ends processed) / 90mm or more (one end processed) |
| Device size | 9.0m x 1.85m x 2.0m (excluding optional parts) |
| Changeover time | 15 minutes or less/1 type of terminal (excluding inspection time) |
Contact Information Regarding this Matter
About products
Sales Department
Wire Processing System Department, Industrial Machinery Systems Division, ShinMaywa Industries, Ltd.
Address:
3-2-43 Shitte, Tsurumi-ku, Yokohama, Kanagawa, 230-0003, Japan
For news organizations
Public Relations Department, Corporate Planning Division ShinMaywa Industries, Ltd.
1-1 Shinmeiwa-cho, Takarazuka, Hyogo, 665-8550, Japan
The information published in this content is current as of the date of publication.
Please note that this information may differ from the latest information due to changes in our group's business strategies and organization.