CNMJ-MT Series
Dimensions
Sectional View (CNMJ80-MT, CNMJ100-MT)
| No. | Name | Material |
|---|---|---|
| 1 | Cable | PVC insulated PVC sheathed cable |
| 2 | Motor | Shaft：420J2 stainless steel |
| 3 | Oil housing | Gray iron casting (FC250) |
| 4 | Mechanical seal | Upper SiC/SiC Lower SiC/SiC |
| 5 | Mechanical seal bracket | Gray iron casting (FC250) |
| 6 | Impeller | Gray iron casting (FC250) |
| 7 | Pump housing | Gray iron casting (FC250) |
| 8 | Chopper plate | 304 stainless steel |
| 9 | Shim | Polyethylene (PE) |
| 10 | Oil seal | Acrylonitrile butadiene rubber (NBR) |
| 11 | OPressure equalizer (Not on 1.5 kW pumps) |
Foamed acrylonitrile butadiene rubber |
| 12 | Ball bearing (Lower) |
- |
| 13 | Stator housing | Gray iron casting (FC250) |
| 14 | Ball bearing (upper) |
- |
| 15 | Thermal Protector | - |
Dimensions
Guide rail installation type
| Pump model | Installation Kit No. |
Rated output (kW) |
A | B | C | D | E | F |
|---|---|---|---|---|---|---|---|---|
| CNMJ80-MT | P80B | 1.5 | 619 | 847 | 327 | 270 | 700 | 500 |
| P100B | 860 | 600 | ||||||
| P80B | 2.2 | 631 | 847 | 500 | ||||
| P100B | 860 | 600 | ||||||
| P80B | 3.7 | 692 | 847 | 500 | ||||
| P100B | 860 | 600 | ||||||
| CNMJ100-MT | P80B | 5.5 | 724 | 926 | 394 | 275 | 600 | |
| P100B | 939 | |||||||
| P80B | 7.5 | 769 | 926 | |||||
| P100B | 939 |
Free Standing type
| Pump model | Installation Kit No. |
Rated output (kW) |
A | B | C | D |
|---|---|---|---|---|---|---|
| CNMJ80-MT | F80 | 1.5 | 607 | 541 | 327 | 260 |
| F100 | 558 | |||||
| F80 | 2.2 | 619 | 541 | |||
| F100 | 558 | |||||
| F80 | 3.7 | 680 | 541 | |||
| F100 | 558 | |||||
| CNMJ100-MT | F80 | 5.5 | 712 | 619 | 394 | 265 |
| F100 | 637 | |||||
| F80 | 7.5 | 757 | 619 | |||
| F100 | 637 |
Click here to view E-HANDBOOK on your computer
