Model TR201C Terminating Machine

TR201CS / TR201CSS

(Tinning / crimping machine TR201CS [single end tinning] , TR201CSS [both ends tinning] )

Both twisting / tinning and crimping are available with simply replacing the stages. Compatible with lead-free tinning.

Specification

Type TR201CS[Single end tinning]/ TR201CSS[Both ends tinning]
Power Three phase AC 200V±20V 15A(50/60Hz)
Air Supply*1 0.4 - 0.5MPa[4-5kgf/cm2]60NL/min.or over
Motion Control 9 Axis AC servo-control
Processing Capacity*2
cutting length:30mm
strip length:2mm
4,500pcs / h4,500pcs/h (cutting length 30mm, strip length 2mm, crimp to crimp)
Crimp to crimp 4,500pcs/h
Tin to crimp 3,900pcs/h
F: Twist and tin, R: crimp 3,000pcs/h
F: Twist and tin, R: Twist and tin 2,500pcs/h
Cutting Length Max 9,999mm
Cutting Length Min*3 30mm (crimp to crimp)
Strip Length Full strip 1 - 15mm(0.1mm Unit)
Semi strip 1 - 25mm(0.1mm Unit)
Twisting length F: 2 - 15mm (Practical use) [Input is 0 - 30mm]
R: 2 - 6mm (Practical use) [Input is 0 - 15mm]
tinning length F: 2 - 15mm (Practical use) [Input is 0 - 30mm]
R: 2 - 6mm (Practical use) [Input is 0 - 15mm]
Wire Size*4*5
(in twisting and tinning process)
Size AWG22 - 32 [AWG18-36]
(Stranded wire)
WireO.D [φ 2.5 -] φ 1.6 - 0.5mm
Press Capacity 14.7kN[1.5t]
Applicable Terminal*6*7 Continuous Open Barrel, Side and End Feed
Reel size for wire tin inner diameter 12 mm or larger, outer diameter 85 mm or smaller, and width 75 mm or smaller.
Operation Temperature 15 - 25°C
Weight (Single end tinning)Main body of about 430kg, Pre-feeder of about 30kg
(Both ends tinning)Main body of about 440kg, Pre-feeder of about 30kg
  • Compressed air with moisture, oil, or dust may cause malfunction of the equipment.
  • The processing capacity may decline due to specification or conditions of processing goods.
  • The minimum cut length may change due to the applicator to use, type of the wire, or processing conditions. By using the optional special clamp, shorter ones may be processed. Contact us for details.
  • Cables thicker than AWG22 or thinner than AWG32 may be processed by using the urethane roller or special clamp. Contact us for details.
  • Up to the maximum outer diameter of φ2.5mm can be set. However, due to the structure,in which cables are tinned diagonally, with cables of φ1.6mm or larger including the cover, the cover may touch tin.
  • When removing the tinning unit and equipping with the applicator, the optional "removable plate" is necessary.
  • As for end feed terminal, the optional "reel hanger for end feed" is necessary.

Feature of TR201CS/TR201CSS

Simply replacing

Simply replacing

Since tin tank and flux tank are static, consumption and splash of tin and flux can be reduced.

Flux applying operation

Flux applying operation

Tinning operation

Tinning operation

  • The position to apply flux can by 0.1mm.

Extra-fine cable compatible twisting mechanism

High precision twisting is available for extra-fine/extra-short cables. The file is positioned vertically, saving space.

Twisting machine

Twisting machine

Twisting operation

Twisting operation

Fluid level detector

The liquid level of tin is detected with the sensor, and held constant in order to supply tin automatically.

Liquid level detection sensor

Liquid level detection sensor

Automatic tin feeder

Automatic tin feeder

Temperature adjustment

Easy to read digital display allows easy temperature setting. High temperature setting up to 400°C is available. It is suitable for lead-free tin.

Temperature adjustment