Energy Saving Proposal by Replacing Blowers with Mixers
for Equalization Tank Agitation

Blowers have conventionally been used in equilization tanks. For equilization tanks which do not require air agitation, using a mixer for agitation instead of a blower can effectively reduce energy consumption.

* You can expand the figure below with your fingers.

Replacing a blower with a mixer for agitation of the equalization tank

Illustration: Energy Saving Proposal by Changing from Blowers to Mixers for Equalization Tank Agitation

Examples

  • The Agitating Machine for Equalization Tank of Pharmaceutical Company in Yamagata

    Example photo 1 Installing by the pipe Existing diffusing pipe
    Example photo 2

    Comparison of Energy Consumption

    Energy 80% SAVING Comparison of Energy Consumption: Energy 80% SAVING Blower 15kW Submersible Mixer 3kW
    • Output:1.5kW
    • Quantity:2units/tank
    • Total output:3kW

  • Brewing Company in Miyazaki

    Illustration: Brewing Company in Miyazaki Equalization tank Submersible Mixer

    Comparison of Energy Consumption

    Energy 87% SAVING Comparison of Energy Consumption: Energy 87% SAVING Blower 90kW Submersible Mixer 11.2kW
    • Output:2.8kW
    • Quantity:4units/tank
    • Total output:11.2kW

Energy Saving Proposal by Replacing Aerators
with Low-power Vertical Mixers in Anaerobic and Anoxic Tanks

Wastewater treatment facilities in Japan promote advanced methods such as the anaerobic-anoxic-oxic (A2O) process to improve the quality of treated water. Replacing a submersible aerator with a Low-power Vertical Mixer for agitation saves energy and reduces maintenance. A mixer is also easier to install.

A2O Method Simultaneous Removal of Nitrogen and Phosphorus

* You can expand the figure below with your fingers.

Replacing an aerator with a Low-power Vertical Mixer for agitation of the anaerobic and anoxic tanks

Illustration: A2O method Simultaneous removal of Nitrogen and Phosphorus

Feature Comparision with Aerators (Compared to Our Products)

Submersible Aerator Vertical Mixer
Agitated power consumption density Around 6-8W/m3 Less than 2W/m3
Maintenance of drive unit Need to pull out from tank Install on the ground
Install workability Need work in the tank Only on the ground

Please contact our sales department for further details on Low-power Vertical Mixers.