Model TRD301 Terminating Machine
Crimp force monitor
The crimp force monitor can be integrated onto the ShinPro software including parameters and crimp curve can be graphically display at all times on operation screen.
For special types of wire insulation that can be easily damaged. Steel-made rollers of coarse pitch and fine pitch, urethane rollers and diamond electrodepositing rollers are available. Please consult with us for any other requirements.
It's installed compactly inside the terminal guide. Constant rotation sliding clutch type, power source of 200VAC and capable of removing the paper interlayer by means of rotation.
Reel hanger for the end feed / Terminal overload sensor
It detects entanglement and hang-up of terminals.
Air type wire straightener
The roller pressure is pneumatically controlled by air cylinder. Wide variety of wire types can be taken care of by the air suspension effect.
Special cutter blades
- R-blade cutter: Strip blade has R-shape.
- Thin blade: The strip blade has an angle of 20 degrees.
Please consult with us for any other requirements.
Pre-feeder fitted accumulator
It absorbs hindered contraction at length measurement of long material, and performs bundling smoothly.
Extension wire stackers
It prevents tangles in processing long-length wire size.
The wire tray is made of stainless steel.
|Maximum cut length||1,500mm||2,500mm||3,500mm||5,500mm|
|Number of Accumulation*1||Up to 1,000 … 200 pieces|
|Up to 1,500 … 100 pieces|
|Up to 5,500 … 50 pieces|
|Feed rate*2||6.3 m/s|
- A case of wire equivalent to AVSS2.0mm2.
- Specification of higher speed is employed than the conventional machines of TRS153 / 253 / 353 and the height is reduced.