Model TR201C Terminating Machine

THR202C

(Single-end tinning machine THR202C)

High Speed Processing

3,000 pieces per hour
(Single-end Tinning and Single-end Crimping)

Improved tinning processing quality

Newly tinning unit has been utilized.
Approaching angle to tinning tank is approximately vertical.

THR202C

THR202C

Features

High Speed Processing

  • Max. processing capability :
    3,000 pcs/h
    (R-side: Tinning and Twisting, F-side: Crimping)
  • Improvement ratio: 25%
    (in-house comparison)

Newly developed Unit

Newly developed Unit
  • New Tinning and Twisting Unit

Improved tinning processing quality

Improved tinning processing quality
  • Tinning unit is equipped with the servo motor, for achieving stability insertion.
  • Approaching angle to tinning tank is approximately vertical.

Improved Twisting processing quality

Improved Twisting processing quality
  • Rotary twisting unit has been improved in twisting processing accuracy.
  • Various processing conditions can be set.

Specification

Max. Processing Capability 3,000 pcs/h (F-side: Crimping, R-side: Twisting and Tinning)
Wire size AWG 28-16 (0.08-1.25 mm2), Wire O.D. 0.8~3.2 mm
Cutting Length 30 – 9,999 mm
Strip Length F-side crimping: 0 – 15 mm
R-side tinning: 0 - 25 mm
Twisting・Tinning length R-side: 2 – 20 mm
Crimper capacity F-side: 19.6 kN (2.0 t)
Recommended Solder Wire solder 1.0 - 1.6mm dia.
Soldering Temperature 20 - 400℃
Language English, Japanese, Chinese
Supply 3-phase 200V AC ±10% (50/60Hz), 0.5MPa 150L/min (ANR)
Dimensions 920W × 800D × 1,430H mm (Main body only, exclude projecting parts)
Weight Main body: Approx. 430kg, Pre-feeder: Approx. 30kg
  • Capability might change depending on the processing conditions and processing data. Processing may be difficult depending on wire type.