Model TR201C Terminating Machine

TR202C

(Both-ends crimping machine TR202C)

Maximum processing capacity :
4,500 pieces per hour

  • The processing capacity for longer cables has been increased by compared with the conventional model
  • Processing medium size wire of AWG16 to 28 can be handled
  • Appearance with cleanness
  • Swing type color touch panel
  • Terminal reel neatly housed inside the main body
  • The quiet press with consideration to the working environment
  • Eco cable compatible
TR202C

TR202C

Specification

Processing Capacity*1 4,500pcs/h (Length:30mm, strip length:5mm, crimp to crimp)
Cutting Length Max 9,999mm
Cutting Length Min*2 30mm
Strip Length Full strip 1 - 15mm(0.1mm Unit)
Semi strip 1 - 25mm(0.1mm Unit)
Wire Size*3 Size AWG16 - 28(Stranded wire)
WireO.D φ0.8 - 3.2mm
Press Capacity 19.6kN(2.0t)
Applicable Terminal*4 Continuous Open Barrel, Side and End Feed
Motion Control 9 Axis AC servo-control
Power Three phase AC 200V±20V 15A(50/60Hz)
Air Supply*5 0.4 - 0.5MPa(4-5kgf/cm2) 60NL/min.or over
Weight Main body of about 420kg,Pre-feeder of about 30kg
Operation Temperature 15 - 25°C
  • Compressed air with moisture, oil, or dust may cause malfunction of the equipment.
  • The minimum cut length may change due to the applicator to use, type of the wire, or processing conditions. By using the optional special clamp, shorter ones may be processed. Contact us for details.
  • The processing capacity may decline due to specification or conditions of processing goods.
  • As for end feed terminal, the optional "reel hanger for end feed" is necessary.
  • Compressed air with moisture, oil, or dust may cause malfunction of the equipment.

Dimensional Outline Drawing (Unit:mm)

Dimensional Outline Drawing
  • It is not possible to equip both upper feeding type and lower feeding type at a time and use them concurrently.
  • "End feeding terminal reel hanger","Paper coiler" are optional items.