Model TR201C Terminating Machine

TR201C

(Both-ends crimping machine TR201C)

Terminal crimping of extra-fine and shorter wires can be provided in high quality and high speed.

TR201C

TR201C

Specification

Type TR201C
Power Three phase AC 200V±20V 15A(50/60Hz)
Air Supply*1 0.4-0.5MPa (4-5kgf/cm2) 60NL/min.or over
Motion Control 9 Axis AC servo-control
Processing Capacity*2 4,500pcs/h
Cutting Length Max 9,999mm
Cutting Length Min*3 30mm
Strip Length Full strip:1 - 15mm(0.1mm Unit)
Semi strip:1-25mm(0.1mm Unit)
Wire Size*4 Size:AWG22 - 32 [AWG18-36] (Stranded wire)
WireO.D:φ2.5 - 0.5mm
Press Capacity 14.7kN(1.5t)
Applicable Terminal*5 Continuous Open Barrel, Side and End Feed
Operation Temperature 15 - 25°C
Weight Main body of about 420kg, Pre-feeder of about 30kg
  • Compressed air with moisture, oil, or dust may cause malfunction of the equipment.
  • The processing capacity may decline due to specification or conditions of processing goods.
  • The minimum cut length may change due to the applicator to use, type of the wire, or processing conditions. By using the optional special clamp, shorter ones may be processed. Contact us for details.
  • Cables thicker than AWG22 or thinner than AWG32 may be processed by using the urethane roller or special clamp. Contact us for details.
  • As for end feed terminal, the optional reel hanger for end feed his necessary.