Home > Products > Model TRD301 Terminating Machine > About the series
Model TRD301 Terminating Machine
About the series
Wire Size Application table
*1
An option is available to replace standard clamp with a heavy gauge style clamp.
The crimping press capability is of the standard specification (TRD301 series,24.5 kN)
*2
The mm2/AWG conversion for wire size is for reference only.
Dimensional outline Drawing
*
It is not possible to equip both upper feeding type and lower feeding type at a time use them concurrently.
"End feeding terminal reel hanger," "Insulating paper take-up device" and "PC stand" are optional items.
"End feeding terminal reel hanger," "Insulating paper take-up device" and "PC stand" are optional items.
Specifications
| Type | TRD301 | TRD301 WPA |
TRD301 WPSA |
TRD301 WPSB |
TRD301 MS |
|
| Processing Capacity*1 | Crimp to crimp | 4,500 pcs/h | 4,100 pcs/h | 4,100 pcs/h | 4,500 pcs/h |
1,450 pcs/h (Intermediate strip at one location) |
| Both-ends seal insertion and both-ends crimping | 2,800 pcs/h | |||||
| Front side insertion and both-ends crimping | 3,000 pcs/h | 3,000 pcs/h | 2,600 pcs/h | |||
| Wire Size*2 | Size | 0.2 - 2.0mm2 | AVSS 0.3 - 2.0mm2 CAVUS 0.3 - 1.25mm2 | |||
| Wire O.D | φ 1.0 - 3.0mm | |||||
| Strip Length | Full strip | 1 - 17 mm(0.1 mm Unit) |
Intermediate strip length
10 - 20mm Input is 5 - 22mm (0.1 mm Unit) |
|||
| Semi strip | 1 - 25mm(0.1 mm Unit) | |||||
| Cutting Length Max | 9,999mm | |||||
| Cutting Length Min*3 | 80mm | 100 mm (at seal insertion) |
95 mm (at intermediate strip) |
|||
| Press Capacity | 24.5kN(2.5 t) | |||||
| Applicable Terminal | Continuous Open Barrel, Side and End Feed | |||||
| Applicable seal *4 | Outer diameter of 8mm, length of 12mm or less, circular rubber seal | |||||
| Seal supply system*5 | Drum type parts feeder and in-tube air transport system | |||||
| Motion Control | 10 Axis AC servo-control |
12 Axis AC servo-control |
10 Axis AC servo-control |
|||
| Power*6 | Three Phase 200V AC±20V 15A 50/60Hz | |||||
| Air Supply | 0.5 Mpa(5kgf/cm2) or over 0.1 m3/min (100L/min) Normal or over | |||||
| Displayed language *7 |
Two-languages comprised of English and one another language (Japanese, Chinese, Thai, Spanish or Indonesian) |
|||||
| Operation Temperature | 15 - 25°C | |||||
| Main body dimensions*8 |
Height 1,530 mm × Width 1,080 mm × Depth 880 mm (main body only, excluding protrusions) |
|||||
| Weight |
Main body of about 670kg, Pre-feeder of about 40kg |
Main body of about 690kg,
Pre-feeder of about 40kg |
Main body of about 670kg,
Pre-feeder of about 40kg |
|||
*1
Capacity might change depending on the processing conditions and processing data.
*2
Processing may be difficult depending on wire type.
*3
Length may become longer depending on setting of the applicator and processing data.
*4
Please consult with us if you require a shape larger than the indicated size.
*5
The indications are of the standard specification.
Others than the indications,such as the "Bowl feeder type", may be we may have to use parts feeder other than the drum type depending on seal type.
*6
A voltage changing transformer is available for use in other countries than Japan upon request.
*7
For languages other than the indicated,please consult with us.
*8
The indicated values are for the main body only. For the installation dimensions,pleases see the overall size drawing.